Pages

▼

Sunday, 4 February 2018

The Nominal Tools Setting Thickness Guide Take 2 - Episode 203


After designing, making and demonstrating the Nominal thickness Tool Setter last week it has become obvious that the same thing can be achieved with a tweak to the Mach3 Script or the UCCNC macro for tool setting. This video shows how this works. There are advantages to  a software based solution such as infinite nominal thicknesses and the ability to use whatever tool setter you want. The tool setter I made still has its place for those who want a hardware based solution of for those who are unable to implement a software solution because of control software constraints.

Click to view
Please read this first.
The date included in the script will allow you to check if you have the most up to date version. There may have been changes to the script for bug fixes or feature improvement so please check.

 If you find an issue with a script or Macro please advise me ASAP so that a fix can be found and implimented. Use the contact form on this page.
Mach3 Scripts
There are 4 scripts available here split into metric and imperial and single pass and 2 pass touch off.
All files are based on Big Tex's Auto zero setting script  Select the script you want to use and you will need to change the PlateThickness value to match your tool setter plate but other than the remaining values should be ok.

 Files updated 11/02/18 to add additional information in question box


https://www.dropbox.com/sh/7c5lmhl58lyhzn7/AACy4fPjUVi1RIX4Nh0Sm884a?
UCCNC Macros
Macro courtesy of John Revill
Select either metric or Imperial and rename to M31.txt
Replace the Aluminum touch off plate thickness value to match your own plate.
Replace the M31.txt in your UCCNC profile with the new one. 

 This script is slightly diffrent from the Mach3 one demonstrated in the video. You need to enter 0 when setting to the surface of the stock as Enter will not work at this time. This will be updated ASAP so keep an eye out for this.

Script updated 09/02/18 to remove the need to enter 0 in question box. You can now just press the enter button if you are not using an offset. eg you have the tool setter on top of the material.


https://www.dropbox.com/sh/avbquib6r4yw5nv/AAAln02mvRbTnJGPzuYILjMOa?


Thank you for watching  and I hope you find this useful.
Feel free to leave a comment or any suggestions you may have.

 Cheers
Peter



at

14 comments:

  1. Rockman44184 February 2018 at 02:29

    Thanks for these two different Scripts. I wasn't sure and checked and your scripts for Mach3 were a lot newer than the one I had before and I couldn't even find one for UCCNC at all.

    ReplyDelete
  2. Neal T. Shafto, Freelance, at Old Guy Photo4 February 2018 at 09:10

    very grateful for your video's and the macro files...u r a true friend and cnc contributor

    ReplyDelete
  3. Rickmcolorado4 February 2018 at 13:08

    Thank you for the scripts,.

    ReplyDelete
  4. Anonymous4 February 2018 at 17:16

    Thanks for the scripts Peter, much better ones than I have now. ;-)

    ReplyDelete
  5. scooterpunk6 February 2018 at 09:42

    Again Peter you have out done yourself.Great video can't wait till next week.

    ReplyDelete
  6. Unknown6 February 2018 at 16:00

    Thanks peter. :)

    ReplyDelete
  7. Anonymous10 February 2018 at 12:30

    Thanks Peter. Great work and good videos.
    Keep 'em coming mate!
    Cheers

    ReplyDelete
  8. Glen15 February 2018 at 07:17

    Thanks Peter for yet another GREAT video and also for providing the Macro files!
    Your generosity is more then helpful!

    Thanks

    Glen

    ReplyDelete
  9. Glen15 February 2018 at 07:30

    Just had a look at the code, nice!
    One suggestion for a code improvement would be to add a "touch plate to the tool" request at the beginning.
    This would require the operator to touch the touch plate to the tool to make sure it its working. once it sees the tool touch, it would state "tool touch OK"
    Why would this be a good Idea you may ask? Well the other day I was using my touch block to Zero my Z
    and I forgot to attach the wire to the block. The tool came down and just kept on going until it broke the bit :-(

    Glen

    ReplyDelete
  10. Glen15 February 2018 at 17:50

    Hi Peter its Glen GH from youtube. I updated your script to add the "touch plate to the tool" code.its added at the top of the script as the first item.
    What is the best way to send it to you?

    Glen

    ReplyDelete
  11. blogs18 February 2018 at 09:26

    This is my first time visit to your blog and I am very interested in the articles that you serve. Provide enough knowledge for me. Thank you for sharing useful and don't forget, keep sharing useful info: toolsduty

    ReplyDelete
  12. Unknown16 August 2018 at 15:32

    Do you know how to do centre finding using a Edge finder what I mean it's tool with a Hole in one corner and is used to find XY corner on jobs I've made one but the Script I've got does not work properly it might be me? Can you help
    Winston

    ReplyDelete
  13. Unknown16 August 2018 at 15:45

    Winston
    It's me again just to say I know it sounds like I'm stating the obvious.
    I forgot to mention I use Mach3 if you need a a copy of the various codes I've got I will send them to you.

    Winston

    ReplyDelete
  14. Khalid Khattak13 December 2020 at 09:54

    Peter..You are the man... Can you make a script for fixed plate like Gerrys Screenset 2010!!!

    ReplyDelete